Payment & Shipping Terms:
|RAM:||128M||Band:||2.4G + 5.8G|
|RF Power:||≤27dBm||Port:||1*10/100M WAN, 1*10/100M LAN|
750Mbps Data Rate Dual-Radio High Power Ceiling Mounted WiFi Access Point
X770 11ac Ceiling Wireless Access Points based on SNMP Protocol, it is specifically designed to operate in Residential and commercial applications. Comply with IEEE 802.11ac/n/g/b standard, it is 2.4GHz and 5GHz dual radio, with data rate up to 733Mbps(300Mbps in 2.4G, 433Mbps in 5G), enable users to enjoy more stable and faster Ethernet surfing even access into 100+ end users; Tested 101 concurrent end users.
Equipped with Qualcomm Chipset, 500mW high RF Power and high gain 5dBi antenna, it is 4x Wi-Fi Range than normal wireless router or wireless access points, tested in 6 hotel room Wi-Fi Range.
Build in advanced Wi-Fi channel analysis tool, adjustable RF Power, clients isolation, tag VLAN, it can applied in different environment with stable and safety performance.
Centralized managed by WLAN control, work with PoE switch, it is plug and play, Zero configuration in large quantity installation. What’s more, it can access into cloud server for remote management, advertisement and captive portal authentication like Facebook Login, Google Login, Member Login and SMS Login.
This high power, dual radio and high speed wireless access point can be deployed in a wide array of situations for both residential and commercial applications.
DC Power available, Adjustable RF Power based on room range; Then support Gateway operation mode, no need more wireless router; What’s more, support cloud server access for remote control, to provide effective wireless connectivity.
Support PoE, High RF Power with 6 hotel room Wi-Fi range, 100+ end users, work as wireless AP and managed by WLAN Controller, X770 public applied in hotel, school, shopping mall in mass installation.
|Standard||802.11ac/b/g/n, MIMO technology|
433Mbps compatible with 5.8GHz
300Mbps b/g/n for 2.4GHz
OFDM = BPSK,QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Ch.1-13 for 2.4GHz
Ch.36-165 for 5.8GHz
2.412GHz-2.472 for 2.4GHz
5.180GHz-5.825Ghz for 5.8GHz
|Wireless Security||64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption|
2.4G: 11n @MCS7:22±2DB, @MCS0:24±2DB.
11g @54M:23±2DB, @6M:25±2DB.
11b @11M:25±2DB, @1M:27±2DB.
5.8G: 11a @54M:22±2DB, @6M:24±2DB.
11n @MCS7:20±2DB, @MCS0:22±2DB.
11ac @MCS9:19±2DB, @MCS0:21±2DB.
2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0.
11g: -72dbm@54Mbps, -88dbm@6Mbps.
11b: -85dbm@11Mbps, -94dbm@1Mbps.
5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps.
11n: -70dbm@MCS7, -90dbm@MCS0.
11n: ≤-28 DB
11g: ≤-25 DB
11b: ≤-10 DB
11a: ≤-25 DB
|Chipset||Qualcomm QCA9531 + QCA9887|
|Memory||128MB DDR2 RAM|
|Interface||1 * 10/100Mbps RJ45 WAN Port|
|1 * 10/100Mbps RJ45 LAN Port|
|1 * Reset button, press 15 seconds to revert to default setting|
|Antenna||Build in 5dBi MIMO Antenna|
PoE: X770: 24V Passive PoE, 12W
|Standard Version||Bandwidth: 20Mhz, 20/40Mhz, 80Mhz|
|Operation Mode||Gateway, Wireless AP, Repeater, WISP|
|SSID No||4 SSID for 2.4G, 4SSID for 5.8G|
|Factory Default Setting||Yes|
|Centralized Management by AC Controller||Yes|
|Firewall||DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding
750Mbps Dual Band wireless access point
Quick Installation Guide
|System Requirements||Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux|
Operating Temperature: -20~55 ℃
Storage Temperature: -40~70 ℃ (-40 ℉~158℉)
Storage Humidity: 5%~90% non-condensing