Payment & Shipping Terms:
CPE-890D is a high power industrial 5G outdoor CPE with 10KM Wi-Fi range. Comply with the next generation 802.11ac Wi-Fi standard, Qualcomm Chipset, combined 900Mbps high speed in 5G, equipped Gigabit WAN port, 3 times Ethernet data rate faster than 300Mbps model; Then it with LED display to show and configure CPE’s operation mode, Channel, IP address and Signal Strength, simple to do the Point to Point connection by reset button, no need to access into GUI.
900Mbps Data Rate & Gigabit WAN/LAN Ports:
CPE-890D features 802.11ac Wi-Fi and 2*2 MIMO technology, 900Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high-speed internet access and more end users access
5GHz frequency, more channels, lower latency, higher stability:
CPE890D with the full frequency of 5020~6100MHz, more than 200 channels available, it avoids the same frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.
10KM PTP/PTMP Distance;
Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, 18dBi MIMO high gain panel antenna, greatly increase the Wi-Fi range to 10KM distance, then supply the stable Wi-Fi signal for users.
CPE-890D with LED display to show AP/Client operation mode, Channels, IP address and RF Power; What’s more, it is easy to setup CPE-890D IP address, RF Power, Channels by setting switch on product, no need to access into GUI, avoid the complex setup program, simple to check the working status.
Multiple operation modes for Multiple Application:
CPE-890D support Gateway, WISP, Wireless AP, Wi-Fi Repeater, WDS operation mode, it is widely used in Point to Point(PTP), Point to Multi-Point(PTMP) Connection, WISP Connection, and Wireless Security;
Access Controller System & Cloud Management System:
With Access Control System under AP/WDS operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore...
Then work with Cloud Management System, easy to do central and remote management, advertisement and multi-authentication make this AP more professional in Wi-Fi Projects.
|Standard||802.11ac/a, MIMO technology|
|Memory||128MB DDR2 RAM|
|Interface||1 * 10/100/1000Mbps RJ45 WAN Port|
|1 * 10/100/1000Mbps RJ45 LAN Port|
|1 * LED display, 1 * F(Function) switch button, 1 * S(Select) button, press it to setup WDS PTP/PTMP connection|
|1 * Reset button, press 15 seconds to revert to default setting/press 1 seconds to finish the WDS PTP/PTMP connection|
|Antenna||Build in 18dBi MIMO Panel Antenna|
|Power consumption||24V PoE, <8W|
|Size||315mm * 145 mm * 80mm|
|5GHz: Standard: 5150~5825MHz, Debug: 5020~6100MHz|
|Modulation||OFDM = BPSK,QPSK, 16-QAM, 64-QAM|
|DSSS = DBPSK, DQPSK, CCK|
|Receive Sensitivity& RF Power|
|EVM||802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB|
|Operation mode||Wireless AP, Gateway, WISP, Wi-Fi Repeater, WDS|
|WAN Type||Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)|
|Wireless Security||64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption|
|SSID||Multiple SSID up to 4|
|Firewall||DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding
900Mbps Dual Band wireless access point
Quick Installation Guide
|System Requirements||Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux|
Operating Temperature: -30~55 ℃
Storage Temperature: -40~70 ℃
Humidity: 5%~95% non-condensing
|Management||Firmware GUI, Remote Management, WLAN Controller, Cloud Management System|