Payment & Shipping Terms:
|RF Power:||500mW||Antenna:||15 DBi Panel Antenna|
900Mbps 500mW Realtek Chipset 15dBi Panel Antenna PTP PTmP 5KM 5.8G Outdoor Wireless CPE
CPE850 is an high power industrial 5G outdoor CPE with the next generation 802.11ac Wi-Fi standard, combined 900Mbps high speed in 5G, equipped Gigabit WAN port, 2 times Ethernet data rate faster than CPE880, it make more than 50 end users can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.
900Mbps Data Rate & Gigabit WAN
CPE850 features 802.11ac Wi-Fi and 2*2 MIMO technology, 900Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high speed internet access and more end users access.
Tested the data throughput is 200Mbps in 1000 meters, can work with more than 5PCS IP camera to save the CPE cost.
High Power and High Gain Antenna for more range
Designed in two line Power Amplifier on PCB board, the power can be 800mW high power, 14dBi MIMO high gain antenna, greatly increase the Wi-Fi range and supply the stable Wi-Fi signal for users.
Power over Ethernet
CPE850 has integrated passive Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Access Controller System & Cloud Management System
With Access Control System under AP operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....
Then work with Cloud Management System, easy to do central and remote management, advertisement and multi authentication make this AP more professional in Wi-Fi Projects.
Comply with IEEE 802.11ac/a/n, 5G,900Mbps Data Rate
1 10/100/1000Mbps WAN Port, 1 10/100Mbps LAN Port
800mW high power, build in 14dBi MIMO panel antenna, stronger signal strength, more wireless coverage
Support passive PoE
Support SSID broadcasting, Multi SSID up to 4
Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP operation mode
With function of build in firewall, IP filter, URL filter and MAC filter
Comply with IEEE 802.3az standard, beamforming technology, RF power adjustment and frequency analyzer for better application in different environment
Support DDNS, VPN pass through, Port forwarding and DMZ host
Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security
|Standard||802.11ac/a/n, MIMO technology|
|Memory||64MB DDR2 RAM|
|Interface||1 * 10/100 /1000Mbps RJ45 WAN Port|
|1 * 10/100 Mbps RJ45 LAN Port|
|1 * Reset button, press 15 seconds to revert to default setting|
|Antenna||Build in 14dBi MIMO Panel Antenna|
|Power consumption||24V PoE<13W|
|Size||L 257mm, W: 87mm, H: 38 mm|
|Modulation||OFDM = BPSK,QPSK, 16-QAM, 64-QAM|
|DSSS = DBPSK, DQPSK, CCK|
802.11a:54M 23±2DB,6M 262 DB.
802.11n HT20:MCS7 23±2DB, MCS0 26±2DB.
802.11n HT40:MCS7 22±2DB, MCS0 25±2DB.
802.11ac HT80:MCS9 20±2DB, MCS0 23±2DB.
802.11a: -72dbm@54Mbps; -90dbm@6Mbps.
802.11n HT20: -70dbm@MCS7, -90dbm@MCS0 .
802.11n HT40: -66dbm@MCS7, -90dbm@MCS0 .
802.11ac HT80:-60dbm@MCS9, -86dbm@MCS0 .
802.11a: ≤-25 DB
802.11n: ≤-28 DB
802.11ac: ≤-28 DB
|Operation mode||Wireless AP, Gateway, WISP, Wi-Fi Repeater|
|WAN Type||Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)|
|Wireless Security||64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption|
|SSID||Multiple SSID up to 4|
|Firewall||DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding
900Mbps Dual Band wireless access point
Quick Installation Guide
|System Requirements||Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux|
|Environment||Operating Temperature: 0~40 ℃(32 ℉~104℉) Storage Temperature: -40~70 ℃ (-40 ℉~158℉)
Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing
|Management||Firmware GUI ,Remote Management, WLAN Controller, Cloud Management System|